| Windows 10 DLL File Information - comres.dll |
The following DLL report was generated by automatic DLL script that scanned and loaded all DLL files in the system32 directory of Windows 10, extracted the information from them, and then saved it into HTML reports. If you want to view a report of another DLL, go to the main page of this Web site.
General Information
| File Description: | COM+ Resources |
| File Version: | 2001.12.10941.0 (fbl_impressive.150522-2224) |
| Company: | Microsoft Corporation |
| Product Name: | Microsoft® Windows® Operating System |
| DLL popularity | Very Low - There is no any other DLL in system32 directory that is statically linked to this file. |
| File Size: | 1,268 KB |
| Total Number of Exported Functions: | 0 |
| Total Number of Exported Functions With Names: | 64 |
Section Headers
| Name | Virtual Address | Raw Data Size | % of File | Characteristics | Section Contains... |
|---|---|---|---|---|---|
| .text | 0x00001000 | 512 Bytes | 0.0% | Read | Initialized Data |
| .rsrc | 0x00002000 | 1,296,896 Bytes | 99.9% | Read | Initialized Data |
Static Linking
No static linking in this file.
General Resources Information
| Resource Type | Number of Items | Total Size | % of File |
|---|---|---|---|
| Icons | 20 | 289,336 Bytes | 22.3% |
| Animated Icons | 0 | 0 Bytes | 0.0% |
| Cursors | 0 | 0 Bytes | 0.0% |
| Animated Cursors | 0 | 0 Bytes | 0.0% |
| Bitmaps | 16 | 792,992 Bytes | 61.1% |
| AVI Files | 0 | 0 Bytes | 0.0% |
| Dialog-Boxes | 109 | 81,898 Bytes | 6.3% |
| HTML Related Files | 0 | 0 Bytes | 0.0% |
| Menus | 4 | 964 Bytes | 0.1% |
| Strings | 1,161 | 124,918 Bytes | 9.6% |
| Type Libraries | 0 | 0 Bytes | 0.0% |
| Manifest | 0 | 0 Bytes | 0.0% |
| All Others | 5 | 381,300 Bytes | 29.4% |
| Total | 1,315 | 1,671,408 Bytes | 128.7% |
Icons in this file
There are 20 icons stored in this DLL file. You can view all these icons in the following small thumbnail:
Cursors in this file
No cursors found in this file
Dialog-boxes list (up to 1000 dialogs)
In the following section, you can find the captions of dialog-boxes stored in this DLL. The list is currently limited to 1000 dialogs.| ID | Dialog Caption |
|---|---|
| 331 | Setup Error |
| 601 | Assert failure in COM+ |
| 757 | Configure Partitions for New Set |
| 758 | Configure Users for New Set |
| 759 | General Properties on New Set |
| 760 | Add/Remove Partitions in Set |
| 761 | Add/Remove Users |
| 762 | General Properties for New Partition |
| 765 | Update Default Partition |
| 1101 | Default Properties |
| 1102 | Default Protocols |
| 1103 | Properties for COM Internet Services |
| 1104 | Add Port Range |
| 1105 | General |
| 1106 | Service Setup |
| 1108 | Alias Component |
| 1109 | Add Directory Service Application Partition |
| 1110 | Browse As |
| 1111 | Microsoft COM+ Component Install Wizard for Partitions |
| 1112 | Dependent Services |
| 1113 | Endpoint Properties |
| 1114 | Select DCOM protocol |
| 1116 | Pooling && Recycling |
| 1117 | General |
| 1118 | Advanced |
| 1119 | General |
| 1120 | Security |
| 1121 | General |
| 1122 | Microsoft COM+ Component Install Wizard |
| 1123 | Microsoft COM+ Component Install Wizard |
| 1124 | Microsoft COM+ Component Install Wizard |
| 1125 | General |
| 1126 | General |
| 1127 | Security |
| 1128 | Overwrite Files? |
| 1129 | Security |
| 1131 | Add Computer |
| 1132 | General |
| 1135 | Errors Occurred |
| 1137 | Application Wizard |
| 1138 | Create Empty Application |
| 1139 | Advanced |
| 1140 | Select Application Files |
| 1141 | Installation Options |
| 1142 | Set Application Identity |
| 1143 | Identity |
| 1144 | Options |
| 1145 | Activation |
| 1146 | Move component(s) |
| 1147 | Advanced |
| 1149 | caption |
| 1150 | caption |
| 1151 | Queuing |
| 1152 | Security |
| 1153 | Security |
| 1154 | Activation |
| 1156 | Queuing |
| 1157 | Export Application |
| 1158 | Concurrency |
| 1159 | Microsoft COM+ Component Install Wizard |
| 1160 | General |
| 1161 | Options |
| 1162 | Transactions |
| 1163 | Publisher Properties |
| 1164 | Add/Edit property |
| 1165 | Options |
| 1166 | Event Classes |
| 1167 | Interfaces and Methods |
| 1168 | Dump |
| 1169 | General |
| 1170 | New Application Partition |
| 1171 | Copy application(s) |
| 1172 | General |
| 1173 | Properties |
| 1174 | Implementation |
| 1175 | Advanced |
| 1176 | General |
| 1177 | Location |
| 1178 | Identity |
| 1179 | Endpoints |
| 1182 | Assign Default Partition |
| 1185 | New Partition Set |
| 1186 | Add Partitions to Partition Set |
| 1188 | Partition Install Wizard |
| 1189 | Partition Install Wizard |
| 1190 | Select Application Files |
| 1191 | Installation Options |
| 1192 | Security |
| 1194 | Export Partition |
| 1196 | Set Application Roles |
| 1197 | Set Application Roles |
| 1198 | COM Security |
| 1199 | Security |
| 2520 | General |
| 2521 | General |
| 2530 | Transaction Properties |
| 2659 | Security Configuration |
| 2674 | Tracing Options |
| 2688 | Logging |
String resources in this dll (up to 1000 strings)
| String ID | String Text |
|---|---|
| 101 | Manages the configuration and tracking of Component Object Model (COM)+-based components. If the service is stopped, most COM+-based components will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start. |
| 102 | Administrator |
| 103 | Any Application |
| 104 | QC Trusted User |
| 105 | Reader |
| 106 | Server Application |
| 107 | BUILTIN |
| 108 | Activator |
| 111 | Upgrading COM+ (%1 of %2 applications) |
| 114 | Members of this role are allowed to activate components in this partition. |
| 188 | STATUS [%3]: Exporting application '%1' to '%2' |
| 190 | ERROR [%4]: An error occurred copying files to '%3' while exporting application '%2' . The error code was %1. Make sure all the component files in this application are accessible. |
| 191 | ERROR [%3]: An unexpected error occurred exporting application '%2'. The error code was %1. |
| 193 | ERROR [%2]: An error occurred creating a share to '%3'. Make sure the folder is not open in another application, including the File Explorer. The error code was %1. Check the Event Viewer on that computer for further messages. |
| 194 | ERROR [%2] : An error occurred accessing the COM+ System application on this computer. COM+ may not be installed correctly. The error code was %1. There may be further messages in the Event Viewer on this computer or on your local computer. |
| 196 | STATUS [%1]: Preparing to replicate from source computer. |
| 197 | COM REPLICATION LOG %1 |
| 200 | ERROR [%2]: An error occurred copying exported application files from the source to the target. The error code was %1. Make sure the target folder mentioned in the previous status message is not open in another process, including the File Explorer. |
| 201 | STATUS [%1]: Preparing to replicate to target computer. |
| 202 | STATUS [%2]: Installing application from '%1'. |
| 203 | ERROR [%3] : An unexpected error occurred installing application from '%2'. The error code was %1. |
| 204 | STATUS [%1]: Removing the computer list. |
| 205 | STATUS [%2]: Copying computer list from '%1'. |
| 206 | STATUS [%2]: Copying local computer properties from '%1'. |
| 207 | STATUS [%2]: Deleting application '%1' on target computer. |
| 209 | STATUS [%2]: Copying all exported application files from the source computer to '%1' on the target. |
| 211 | STATUS [%1]: Removing old replica files in '%2'. |
| 212 | ERROR [%2]: An error occurred removing and renaming replica folders. The error code was %1. Make sure that none of the folders mentioned in the 3 previous status messages is open in another application, including the File Explorer. Check the Event Viewer on that computer for further messages. |
| 213 | ERROR [%3]: An error occurred removing the temporary network share '%2'. The error code was %1. Check the Event Viewer on that computer for further messages. |
| 216 | ERROR [%3]: An error occurred will examining '%2' for applications to install. The error code was %1. Make sure this folder is not open in another application, including the File Explorer." |
| 217 | Make sure the folder is not open in another application, including the File Explorer. |
| 218 | ERROR : The COM version on '%1' is not compatible with the version on your local computer. |
| 219 | STATUS [%1]: Renaming '%2' to '%3'. |
| 220 | ERROR [%3]: An error occurred creating or emptying the folder '%1'. Make sure the folder is not open in another application, including the File Explorer. The error code was %2. Check the Event Viewer on that computer for further messages. |
| 221 | ERROR [%1]: An unexpected error occurred replicating the identity for the application '%2' with ID '%3'. The identity of the application may not be a valid account on the target computer. The application has been disabled. (The error code was %4.) |
| 222 | ERROR [%2] : An unexpected error occurred accessing computer properties. The error code was %1. Additional debugging information: '%3'. |
| 223 | ERROR [%2] : An unexpected error occurred accessing the computer list. The error code was %1. Additional debugging information: '%3'. |
| 224 | ERROR [%2] : An unexpected error occurred deleting applications. The error code was %1. Additional debugging information: '%3'. |
| 225 | ERROR [%2] : An unexpected error occurred clearing the computer list. The error code was %1. Additional debugging information: '%3'. |
| 226 | ERROR [%2] : An unexpected error occurred accessing the catalog. The error code was %1. Additional debugging information: '%3'. |
| 228 | ERROR [%2] : An unexpected error occurred deleting partitions. The error code was %1. Additional debugging information: '%3'. |
| 230 | STATUS [%2]: Deleting partition '%1' on target computer. |
| 232 | ERROR [%2] : An unexpected error occurred adding partitions. The error code was %1. Additional debugging information: '%3'. |
| 234 | STATUS [%1] : Adding partition '%2' on target computer. |
| 236 | ERROR [%1]: Unable to find the application '%2' with id '%3' on the target computer. |
| 237 | ERROR [%1]: The application '%2' is an NT Service. Its identity information has not been replicated. The service has been configured to run as LocalSystem, and has been disabled. |
| 238 | STATUS [%1]: Setting identity for app '%2'. |
| 239 | WARNING: COM+ Partitions are not supported on one or more target machines. COMREPL will only be able to replicate applications in the global partition between the source machine and these target machines. Please enter %1 (upper case) to continue: |
| 240 | STATUS [%1] : Replicating Partition Users. |
| 241 | ERROR [%1] : An error occurred replicating the partition users collection. The error code was %2. Make sure that all of the users in the partition users collection exist or are valid on the target computer. |
| 242 | ERROR [%1] : An unexpected error occurred deleting partition users. The error code was %2. |
| 251 | Errors occurred - refer to the log file for details. |
| 252 | Replication succeeded. |
| 253 | COMREPL replicates one computer's COM+ Applications to a one or more target computers. COMREPL <source> <targetList> [/n [/v]] <source> Specifies the name of the source computer <targetList> Specifies the names of the target computers separated with blanks /n Don't issue confirmation prompts /v Echo log output to the console |
| 254 | WARNING: The entire catalog on %1 will be replaced with the catalog from %2 Replication is an irreversable action. Please enter %3 (upper case) to continue: |
| 255 | Replication terminated. |
| 256 | ERROR: Could not create the replication server object. Error code was %1. |
| 257 | Replication started - logging to %1 |
| 258 | ERROR: The source computer cannot be in the target computer list. |
| 259 | ERROR: Duplicate computer names in the target list. |
| 260 | ERROR: Unsupported option '%1' |
| 261 | ERROR: Missing source and/or target computer. |
| 271 | Error: Unable to initiate refresh (COM library). |
| 272 | Error: Unable to create COMAdminCatalog object. |
| 273 | Error: Refresh failed - hr = %x. |
| 274 | Refresh completed. |
| 361 | %1 %2 (line %3) Error Code = 0x%4 %5 |
| 362 | %1 <Unknown exception!> Error Code = 0x%2 %3 |
| 363 | %1 Setup Error |
| 364 | Microsoft Transaction Server |
| 367 | Continuing Installation |
| 377 | COM+ Setup |
| 382 | Currently there is no help for this error message. Please see %systemroot%\comsetup.log for more details. |
| 407 | Sub-component %1 raised an exception while processing the OC_INIT_COMPONENT setup message. |
| 408 | Sub-component %1 raised an exception while processing the OC_QUEUE_FILE_OPS setup message. |
| 409 | Sub-component %1 raised an exception while processing the OC_ABOUT_TO_COMMIT_QUEUE setup message. |
| 412 | Sub-component %1 raised an exception while processing the OC_COMPLETE_INSTALLATION setup message. |
| 413 | Sub-component %1 raised an exception while processing the OC_QUERY_STATE setup message. |
| 414 | Sub-component %1 raised an exception while processing the OC_QUERY_IMAGE_EX setup message. |
| 415 | Sub-component %1 raised an exception while processing the OC_QUERY_CHANGE_SEL_STATE setup message. |
| 416 | Sub-component %1 raised an exception while processing the OC_CALC_DISK_SPACE setup message. |
| 417 | Sub-component %1 raised an exception while processing the OC_NEED_MEDIA setup message. |
| 418 | Sub-component %1 raised an exception while processing the OC_QUERY_STEP_COUNT setup message. |
| 419 | Sub-component %1 raised an exception while processing the OC_CLEANUP setup message. |
| 420 | Component '%1' setup failed to queue an operation for completion on the next computer restart. This is most likely due to a problem with the registry. Please ensure you have registry write permission and the registry is not corrupt. |
| 421 | Setup failed while attempting to copy file '%1' to '%2'. Please ensure that '%1' exists and that '%2' is not in use by some other process. |
| 422 | Setup failed while attempting to move file '%1' to '%2'. Please ensure that '%1' exists and that '%2' is not in use by some other process. |
| 423 | Setup failed to set the file attributes '%1' on the file '%2'. |
| 424 | Failed to move file from '%1' to '%2' with %3. |
| 425 | Failed to find file '%1'. |
| 426 | Failed to get the registry value '%2', '%1'. |
| 427 | Failed to set the registry value '%2', '%1'. |
| 428 | Failed to load the library '%1'. |
| 429 | Failed to register the type library '%1'. |
| 430 | Failed to get function address from '%1' for '%2()'. |
| 431 | Failed to execute function '%1()' in '%2'. |
| 432 | Setup was unable to open the service control manager. |
| 433 | Setup could not obtain a handle to the '%1' service. |
| 434 | Failed to query service status for '%1'. |
| 435 | Failed to start service '%1'. |
| 436 | Setup timed out waiting for service '%1' to start. |
| 437 | The service control manager was unable to stop the '%1' service. |
| 438 | Setup timed out waiting for service '%1' to stop. |
| 445 | Setup failed because the user who launched the process does not have administrative privileges. Please log in as an administrator and try again. |
| 446 | Setup failed to calculate the disk space requirements for the files specified section '%1' of the COM+ inf file. |
| 447 | Setup failed to create all of the registry and INI entries specified in section '%1' of the COM+ inf file. |
| 448 | Setup failed to install at least one of the services specified in section '%1' of the COM+ inf file. |
| 449 | Setup failed to queue the file operations from section '%1' of the COM+ inf file. |
| 450 | Setup was associate the directory ID '%1' with the directory '%2'. |
| 454 | Setup was unable to save the link '%1' to the target file '%2'. |
| 455 | Setup failed while trying to run '%1'. Make sure that the executable exists. |
| 458 | Setup was unable to create an instance of the '%1' interface from the coclass '%2' |
| 459 | A call to QueryInterface for the interface '%1' failed with a '%2' interface pointer |
| 461 | Setup was unable to get the '%1' collection. |
| 462 | Setup was unable to get the key of the '%1' object. |
| 463 | Set was unable to get an object count from the '%1' collection. |
| 464 | Setup was unable to get item %1 from the '%2' collection. |
| 465 | Setup was unable to get the name of the '%1' object. |
| 466 | Setup was unable to populate the '%1' collection. |
| 467 | Setup was unable to remove the item '%1' from the '%2' collection. |
| 468 | Setup was unable to add an object to the '%1' collection. |
| 469 | Setup was unable to save changes to the '%1' collection. |
| 471 | Setup could not install a COM+ component from '%1' into the application '%2'. |
| 472 | Setup was unable to set the value '%1 = %2' for the '%3' object. |
| 474 | Setup could not import the COM+ component '%1' by name into the application '%2'. |
| 477 | Sub-component %1 raised an exception while processing the OC_SET_LANGUAGE setup message. |
| 478 | Sub-component %1 raised an exception while processing the OC_QUERY_SKIP_PAGE setup message. |
| 479 | Sub-component %1 raised an exception while processing the OC_SET_LANGUAGE setup message. |
| 480 | Sub-component %1 raised an exception while processing the OC_REQUEST_PAGES setup message. |
| 481 | Sub-component %1 raised an exception while processing the OC_QUERY_SKIP_PAGE setup message. |
| 482 | Sub-component %1 raised an exception while processing the OC_FILE_BUSY setup message. |
| 483 | Warning: Setup was not able to completely migrate the legacy MTS catalog. More information about the specific problems can be found in the setup error log. |
| 484 | Installing COM+ |
| 485 | Configuring COM+ |
| 488 | A call to CoInitialize failed: COM could not be initialized on this computer. |
| 489 | COM+ could not add the user '%1' to the role '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly. |
| 490 | COM+ could not set a property of the component '%1' in the application '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly. |
| 491 | COM+ could not import the component '%1' into the application '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly. |
| 492 | COM+ could not install the component from '%1' into the application '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly. |
| 493 | COM+ could not set a property of the object '%1' in the collection '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly. |
| 494 | COM+ could not create the object '%1' with GUID '%2' in the collection '%3'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly. |
| 497 | Setup could not create the COM+ catalog. COM+ will not operate correctly without the catalog. If Windows does not work properly, you can attempt to reinstall, if the problem still persist, then you could contact Microsoft technical support. |
| 498 | The COM+ event classes could not be registered. |
| 499 | Setup could not upgrade the COM+ catalog schema from the previous version. |
| 503 | The Java trustlib directory could not be found. Java has not been installed properly on this computer. |
| 505 | Upgrading COM+ (%1 applications) |
| 506 | Upgrading COM+ (%1 of %2 applications) |
| 507 | %1 setup caught an unhandled exception during installation. %2 will not work when setup completes. Unhandled exception %3 occurred at address %4. More information, including a stack trace, can be found in the %5\comsetup.log file. |
| 508 | COM+ |
| 509 | Please contact Microsoft Technical Support for assistance with this problem. |
| 510 | Members of this role are allowed to modify the configuration of COM+ applications and components on this system. |
| 511 | Members of this role are allowed to examine the configuration of COM+ applications and view information related to active objects and their performance. |
| 512 | Members of this role are trusted to faithfully transmit messages for queued components on behalf of other users. |
| 513 | This role should include the identities under which COM+ server applications run on your system. |
| 514 | This role should include the identities under which any COM+ application (library or server) may run on your system. |
| 515 | COM+ Transaction Context Component |
| 516 | COM+ Extended Transaction Context Component |
| 517 | Queued Components Recorder |
| 518 | Queued Components Player |
| 519 | COM+ QC Dead Letter Queue Listener Starter |
| 520 | COM+ Event Notification Server |
| 521 | COM+ Instance Tracking Component |
| 522 | COM+ Active Process Iteration Server |
| 523 | Debug Dump Server |
| 524 | COM+ Utilities Application |
| 525 | COM+ QC Dead Letter Queue Listener |
| 526 | Creating COM+ objects |
| 527 | Creating COM+ partitions |
| 528 | Creating COM+ applications |
| 529 | Creating COM+ System Application service |
| 530 | Creating COM+ components |
| 531 | Setting COM+ component descriptions |
| 532 | Creating COM+ custom activators |
| 533 | Deleting legacy COM+ roles |
| 534 | Creating COM+ roles |
| 535 | Creating COM+ interfaces |
| 536 | Creating COM+ methods |
| 537 | Installing COM+ roles to applications |
| 538 | Updating COM+ roles |
| 539 | Setting COM+ System Application as system |
| 540 | Com+ Explorer Tracking Event Subscription Application |
| 541 | Base Application Partition\Administrator |
| 545 | Upgrading COM+ Event Classes |
| 546 | Base Application Partition |
| 602 | Component Services |
| 604 | Unable to start the COMUID.DLL server! This file may have become unregistered or damaged. Please verify installation and try again. |
| 606 | Error |
| 607 | http://go.microsoft.com/fwlink/?LinkId=280214 |
| 608 | Component Services (COM+) management tool. |
| 610 | General |
| 611 | Partitions |
| 612 | Users |
| 613 | COM+ |
| 614 | General |
| 615 | New &Partition Set... |
| 616 | Creates a new partition set. |
| 617 | Configure Set &Members... |
| 618 | Configure Set &Partitions... |
| 619 | Adds or removes users in this partition set. |
| 620 | Adds or removes partitions in this set. |
| 621 | COM+ ADS Configuration Error |
| 622 | New Partition Set |
| 623 | New &Partition... |
| 624 | Creates a new partition set. |
| 625 | New Partition |
| 626 | Unable to update set properties |
| 627 | Unable to update partition properties |
| 628 | Failed to create new partition |
| 629 | Unable to set default partition |
| 630 | Failed to create new partition set |
| 631 | Unable to remove partition from partition set |
| 632 | Unable to add partition to partition set |
| 634 | Unable to add user to partition set |
| 635 | Unable to update user properties |
| 636 | Unable to retrieve all user properties |
| 638 | Unable to retrieve all partition set properties |
| 639 | Unable to retrieve all partitions in this partition set |
| 640 | Unable to retrieve all users in this partition set |
| 641 | Unable to retrieve all available partitions |
| 643 | Organizational Units |
| 644 | Please select an Organizational Unit you would like to add to this Partition Set. |
| 645 | Pick Set Organizational Units |
| 646 | Partition Name |
| 647 | Default |
| 648 | Partition ID |
| 649 | The first partition added to this set has been designated as the default partition. Please ensure this is the desired default partition before saving set changes. |
| 650 | COM+ Partition Configuration Warning |
| 651 | Unable to add Organizational Unit to set |
| 652 | Unable to retrieve all Organizational Units in this partition set |
| 653 | <none> |
| 654 | The name value you have entered is too long. Please enter a string less than 64 characters long. |
| 655 | The description value you have entered is too long. Please enter a string less than 512 characters long. |
| 656 | The GUID entered is not in the proper form. Please enter a non-NULL GUID in the following form: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} |
| 657 | Base Application Partition |
| 658 | The GUID entered has already been used by another object in this container. |
| 659 | Component Services |
| 901 | Role-based Security Policy |
| 902 | Default Role Membership Policy |
| 903 | QC Trusted User |
| 922 | Destination of the rejected call: Application Id: %s CLSID: %s IID: %s Method #: %ld Class: %s Interface: %s Method: %s Caller Information: |
| 923 | Svc/Lvl/Imp = %d/%d/%d, Identity = %s %s |
| 924 | (unknown) |
| 925 | (Direct) |
| 926 | (Original) |
| 927 | Server Application ID: %s |
| 928 | Server Application Name: %s |
| 929 | The serious nature of this error has caused the process to terminate. |
| 930 | Error Code = 0x%08x : %s |
| 931 | COM+ Services Internals Information: File: %s, Line: %d |
| 932 | Error in %s(%d): %s |
| 933 | Error in %s(%d), hr = %x: %s |
| 934 | Error in %s(%d), %s: %s |
| 936 | Exception: %s |
| 937 | Address: %s |
| 938 | Call Stack: |
| 940 | Component Prog ID: %s |
| 941 | Method Name: %s |
| 942 | Process Name: %s |
| 943 | Comsvcs.dll file version: %s %s %s |
| 944 | Server Application Instance ID: %s |
| 945 | COM+ |
| 946 | This component is registered in one or more Application Partition(s) outside of Base Application Partition. COM+/VB6 Debugging Integration does not support this scenario. Please debug your component while it is registered ONLY in the Base Application Partition. |
| 947 | COM+ System Application |
| 948 | Manages the configuration and tracking of Component Object Model (COM)+-based components. If the service is stopped, most COM+-based components will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start. |
| 949 | A mini dump of the process will be taken. |
| 950 | A full dump of the process will be taken. |
| 951 | The process will be terminated. |
| 952 | Component: %s |
| 953 | Registry Key: %s%s |
| 1701 | Lar&ge Icon Large Icon |
| 1702 | S&mall Icon Small Icon |
| 1703 | &Detail Detail |
| 1704 | &Status Status |
| 1707 | &Refresh Refresh |
| 1713 | &List List |
| 1741 | Verdana |
| 1800 | Enabling JIT Activation requires synchronization. |
| 1801 | Name |
| 1802 | Activated |
| 1804 | Starting server... |
| 1806 | CLSID |
| 1807 | Server |
| 1808 | Objects |
| 1809 | Prog ID |
| 1810 | Application ID |
| 1811 | Description |
| 1812 | Security |
| 1813 | Authentication |
| 1814 | Default |
| 1815 | None |
| 1816 | Connect |
| 1817 | Packet |
| 1818 | Call |
| 1819 | Packet Integrity |
| 1820 | Packet Privacy |
| 1821 | Enabled |
| 1822 | Disabled |
| 1824 | My Computer |
| 1825 | Select files to install |
| 1826 | Component Files (*.dll;*.tlb)|*.dll;*.tlb|All Files (*.*)|*.*|| |
| 1827 | File |
| 1828 | Component |
| 1829 | Contents |
| 1831 | Proxy |
| 1832 | Properties |
| 1833 | COM+ |
| 1835 | not found |
| 1836 | found |
| 1837 | components |
| 1838 | typeLib |
| 1839 | proxy/stub |
| 1840 | InterfaceID |
| 1841 | Threading Model |
| 1842 | Transaction |
| 1843 | Required |
| 1844 | Requires new |
| 1845 | Not supported |
| 1846 | Supported |
| 1847 | Add Users and Groups to Role |
| 1850 | In Call |
| 1851 | Component Install |
| 1852 | Applying changes... |
| 1853 | Refreshing... |
| 1854 | Opening %s... |
| 1855 | Any Apartment |
| 1856 | Free Thread Apartment |
| 1857 | Catalog Error |
| 1858 | You do not have permission to perform the requested action. If security is enabled on the System Application of the target computer make sure you are included in the appropriate roles. |
| 1859 | Initialization Error |
| 1860 | Unable to start application because %1 is not installed properly. Please re-install this product. |
| 1863 | Cannot open this folder because connection to the MSDTC service on '%1' failed. Make sure that: The computer is running. You have permissions to administer the computer. The computer name is correct. |
| 1864 | Connecting to the MSDTC service on '%1'. This icon will be enabled when the connection has been established. |
| 1865 | Open Folder |
| 1867 | Started |
| 1868 | Stopped |
| 1869 | Starting |
| 1870 | Stopping |
| 1871 | Connecting |
| 1872 | Connection failed |
| 1874 | %s object(s) |
| 1875 | Install |
| 1876 | One or more files do not contain components or type libraries. These files cannot be installed. |
| 1882 | New Application |
| 1883 | You cannot use the name '%1' because it is already in use. Please choose another name. |
| 1884 | Reason |
| 1885 | Name |
| 1886 | The object was not found in the catalog |
| 1887 | One or more of the object's properties are missing or invalid |
| 1888 | The object is already registered |
| 1889 | Some components could not be installed due to the following errors: |
| 1890 | Some changes could not be applied due to the following errors: |
| 1891 | Some objects could not be deleted due to the following errors: |
| 1892 | Some object properties could not be read due to the following errors: |
| 1893 | The component is already configured on the requested computer. The component is either installed in a application or configured as a remote component. Before re-installing, you must delete the existing component. |
| 1894 | An error occurred while processing the last operation on the remote computer '%1'. Error code %2 The event log may contain additional troubleshooting information. |
| 1895 | An error occurred while processing the last operation. Error code %1 The event log may contain additional troubleshooting information. |
| 1896 | Some of the objects properties were missing or damaged. This can occur if the registry entries associated with the item are changed by some other program. Damaged items must be deleted and re-created. |
| 1897 | The item or one of its parent items in the hierarchy has already been deleted. |
| 1898 | Explanation |
| 1899 | You entered an invalid file name or path or selected too many files at once. There is a limit of 256 characters for the combined length of all file names selected. |
| 1900 | An unknown error occurred while adding files. Please try to add the files again. |
| 1901 | Add Computer |
| 1902 | The %1 string you entered is too long. The maximum length is %2 characters. |
| 1903 | name |
| 1904 | The %1 property cannot contain any of the following characters \ / ~ ! @ # % ^ & * ( ) | } { ] [ ' " > < ? : ; . |
| 1905 | You cannot add computer '%1' because it already exists in your Computers folder. |
| 1906 | Export application to File |
| 1907 | Application Files (*.MSI)|*.MSI|MTS Package Files (*.PAK)|*.PAK|| |
| 1908 | Export Application |
| 1909 | Application File |
| 1910 | Application Name |
| 1911 | Choose an installation directory: |
| 1912 | Error occurred reading the application file |
| 1913 | The application file cannot be read. Either the file does not exist, the file contains invalid data or a read error occurred accessing the file. |
| 1914 | The application is already installed. |
| 1915 | A application with the same application ID is already installed. Make sure you have not already installed this application file. |
| 1916 | The file path is invalid |
| 1917 | The installation path does not exist and cannot be created. Check the path syntax. |
| 1918 | An error occurred copying the file |
| 1919 | An error occurred copying files to the destination directory. Some files may be missing from the source directory or you may not have access to the install directory. |
| 1920 | Errors occurred while installing the following applications: |
| 1921 | One or more components could not be installed. |
| 1922 | The application could not be installed because installation of the following components failed: |
| 1923 | Error occurred writing to the application file. Either the path cannot be accessed or an existing file cannot be overwritten. Make sure you entered the full path for the application definition file. The application was not exported. |
| 1924 | Unable to copy component files to the application definition file directory. An error occurred writing to the directory or existing files could not be overwritten. The application was not exported. |
| 1925 | One or more objects in the application are damaged. The application was not exported. Open all components, interfaces, roles and role membership lists in the application to verify the integrity of the application objects. |
| 1926 | Install from application file |
| 1927 | COM DLL |
| 1928 | One or more files are COM DLLs but do not contain any components. These files could be proxy/stub DLLs or component DLLs with no corresponding type information. These files will be self-registered if you proceed. If these files are not proxy/stub DLLs you should remove them from the list. Do you want to proceed and install these files? |
| 1929 | Edit Property |
| 1930 | The shutdown delay must be a number between 0 and 1440. |
| 1931 | The DLL could not be loaded. Check to make sure all required application runtime files and other dependent DLLs are available in the component DLL's directory or the system path. The event log may contain further information. |
| 1932 | One or more files were not found on computer '%1'. When installing components on a remote computer you must enter file names that the remote computer can access. You can enter a UNC name or a drive:path file name that exits on the remote computer. |
| 1933 | A component in the same DLL is already installed |
| 1934 | This component could not be installed because another component in the same DLL is already registered as remote. Delete those remote components and try installing the component again. |
| 1935 | One or more user accounts or groups could not be added to roles because they do not exist. The application was installed. |
| 1936 | One or more users in the application file are not valid |
| 1937 | You must enter a user account. |
| 1938 | Password and confirm password do not match. |
| 1939 | Unable to set required authentication level for update request. The request cannot be completed. |
| 1940 | Set Application Identity |
| 1941 | The timeout value must be between 1 and 3600. |
| 1942 | The user account or password entered is invalid. If you entered a domain account, make sure the name is prefixed with the domain name. |
| 1943 | The component's CLSID is missing or corrupt |
| 1944 | The component's CLSID is not registered. The component may have been unregistered, or the component registration information may be invalid. Make sure the component's self-registration code is correct and re-install the component |
| 1945 | The component's progID is missing or corrupt |
| 1946 | The component's progID information is invalid. The component's progID information does not match the component's CLSID information. The progID or CLSID information may have been incorrectly updated. Make sure that the component's self-registration code is correct and re-install the component. |
| 1947 | Transaction statistics for '%1' are already displayed in another window. You can only open one transactions statistics window for a given server. |
| 1948 | The transaction list for '%1' is already displayed in another window. You can only open one transaction list window for a given server. |
| 1949 | You entered your local computer name. Your local computer is already in the Computers folder under the name "My Computer" |
| 1950 | Application file CLSIDs or IIDs do not match corresponding DLLs |
| 1951 | The component information in the application file is out of date. A component CLSID or IID has been re-generated since the application was exported. You must re-export the application. |
| 1952 | Account |
| 1953 | Timeout |
| 1954 | Shutdown |
| 1955 | Run always |
| 1956 | Interface information is either missing or changed |
| 1957 | If the component was imported, no interface information is available. If the component was installed, the interface information has been regenerated since the component was installed. Delete the component from the application and re-install it. |
| 1958 | The typelib could not be loaded |
| 1959 | Shortcut Menu |
| 1960 | There are no commands that apply to the selected items. |
| 1961 | Are you sure you want to delete '%1'? |
| 1962 | Are you sure you want to delete these %1 items? |
| 1963 | Confirm Item Delete |
| 1964 | Confirm Multiple Item Delete |
| 1965 | No server file share available |
| 1966 | No visible file share point is available on the server to copy component files. The user account set for the System application on the client computer must have read access to a share point on the server. A visible share point must be available to access the proxy/stub DLL and type library for each component. You can use the Explorer to check which proxy/stub DLLs and type libraries are registered for the interfaces implemented by the components. |
| 1967 | You entered a local file name for use on the remote computer '%1'. The drive and path will be interpreted as a file name on the remote computer. Are you sure you want to install this file? |
| 1968 | The file does not exist |
| 1969 | DLL could not be loaded |
| 1970 | The component DLL could not be loaded. Make sure that all required application runtime files or other dependent DLLs are available in the DLL's directory or the system path. |
| 1971 | DllRegisterServer failed on component install |
| 1972 | The component DLL's self-registration routine failed. The DllRegisterServer function failed or the routine did not register the component. |
| 1973 | GetClassObject failed in the DLL. Either a DLL threw an exception during install processing or the DLL and its embedded type library are out of sync. Ensure that the correct versions of all application runtime files or other dependent DLLs are available in the component DLL's directory or the system path. |
| 1974 | Export Application |
| 1975 | The application file name you entered will be interpreted as a local file name on the remote computer '%1'. The remote computer must have access to the file. Are you sure you want to export to this file? |
| 1976 | Install Application |
| 1977 | You entered one or more local file names for use by the remote computer '%1'. These file name will be interpreted as local files on the remote computer. Add these files? |
| 1978 | The install directory is a local path name that will be used by the remote computer '%1'. The path will be interpreted as a local path on the remote computer. Continue with application install? |
| 1979 | The registered typelib ID is not valid |
| 1980 | Registered type library information is invalid. The library GUID, version, locale, or platform information may be corrupt. Re-install the corresponding component(s). |
| 1981 | The "Application Directory" setting in your system registry is missing or corrupted. |
| 1982 | One or more CLSIDs were specified in a type library but were not recognized by any class factories in the DLLs. The component DLLs cannot be installed. |
| 1983 | Errors occurred while in the component registrar |
| 1984 | Registration of this component failed. This component resides in a file which lacks self-registration code but for which an external entity for registering components from such files has been provided. This external entity failed to register the component. Check the event log for details. |
| 1985 | The component registrar referenced in this file is not available |
| 1986 | Registerable |
| 1987 | Running |
| 1988 | Activation |
| 1989 | Same name cannot be set for multiple items. |
| 1990 | This application file version is not supported. |
| 1991 | This application file version is not supported. The catalog into which you are attempting to install this application file does not support this application file's version. |
| 1992 | The '%1' application was created by '%2'. Are you certain the changes you are about to make are supported by '%2' ? |
| 1993 | The applications were created by one or more external products. Are you certain the changes you are about to make are supported by these products? |
| 1994 | The server catalog version is not supported. The catalog is either newer or older than this application and a common version for communication does not exist. |
| 1995 | Changes to this object and its sub-objects have been disabled |
| 1996 | The selected item cannot be changed. The item is currently locked against changes. |
| 1997 | The delete function has been disabled for this object |
| 1998 | The selected item cannot be deleted. This item is currently locked against deleting. |
| 2000 | Service Control Error |
| 2001 | Unable to start the MSDTC service on the target computer. Error code was "%1". |
| 2002 | Unable to stop the MSDTC service on the target computer. Error code was "%1". |
| 2003 | Unable to stop the MSDTC service. There are other running services dependent on MSDTC. |
| 2004 | Library |
| 2005 | Server |
| 2006 | Disabled |
| 2007 | One or more users do not exist or lack security privileges for this operation |
| 2008 | The "Default" authentication level is no longer supported. The authentication level will be changed to "Packet". |
| 2009 | Property Initialization |
| 2010 | DTC Error |
| 2011 | DTC was installed by the SQL server. Please reinstall! |
| 2012 | One or more components are not registered. |
| 2013 | This application file refers to components that were originally imported into the application. These components must be manually registered before installing the application. One or more of these components is not registered on the target system. |
| 2014 | The System application on this computer is currently not available. Please retry the request. |
| 2015 | Unable to connect to the remote computer named '%1'. Either the machine does not exist or you don't have permission to access this machine. |
| 2016 | &Computer |
| 2017 | &Application |
| 2018 | &Component |
| 2019 | &User |
| 2020 | &Role |
| 2022 | %d Items |
| 2024 | Single Thread Apartment |
| 2025 | Main Thread Apartment |
| 2026 | Thread Neutral Apartment |
| 2027 | Synchronization |
| 2028 | Warning |
| 2029 | The transaction level or just in time activation setting that was just selected is not compatible with the currently selected synchronization level. The synchronization level will be changed to a compatible level. |
| 2030 | Welcome to the %s |
| 2031 | Building component list... |
| 2032 | COM+ Component Install Wizard |
| 2033 | This wizard will help you to install or import components. |
| 2034 | The wizard has gathered all necessary information to perform the install. |
| 2035 | COM+ Application Install Wizard |
| 2036 | This wizard will help you to install or create new applications. |
| 2037 | The wizard has gathered all necessary information to perform the install. |
| 2038 | Import or install a component |
| 2039 | Install new components |
| 2040 | Choose Components to Import |
| 2041 | Create Empty Application |
| 2042 | Install or Create a New Application |
| 2043 | Application Installation Options |
| 2044 | Set Application Identity |
| 2045 | Select Application Files |
| 2046 | ...install a new component or import components that are already registered. |
| 2047 | Please specify the file(s) that contain the components you want to install. |
| 2048 | Please choose the components you want to import. |
| 2049 | Please specify the name of the new application. |
| 2050 | Please choose whether you want to install a pre-built application or create an empty application. |
| 2051 | Please specify the install directory and the role configuration. |
| 2052 | Please specify the application identity. |
| 2053 | Please specify the files that contain the application you want to install. |
| 2054 | Thank you for using the %s |
| 2055 | Pooled |
| 2056 | Call Time (ms) |
| 2057 | Minimum pool size must be less than the maximum pool size |
| 2058 | Service request failed with error code %1 |
| 2059 | The service is not installed |
| 2060 | The identity or password set on the application is not valid |
| 2061 | Out of memory |
| 2062 | The application you are trying to export was not found. Press the refresh button to get the latest list of applications. |
| 2063 | An interface in the application you are trying to export is not registered. Make sure that the application was properly installed. |
| 2064 | Maximum pool size may not be set to zero |
| 2065 | Impersonation |
| 2067 | Anonymous |
| 2068 | Identify |
| 2069 | Impersonate |
| 2070 | Delegate |
| 2072 | COM+ Application Export Wizard |
| 2073 | This wizard will help you to export client or server applications. |
| 2074 | The application has been successfully exported. |
| 2075 | Application Export Information |
| 2076 | Please enter information required to export this application. |
| 2077 | Executable Files (*.exe)|*.exe|All Files (*.*)|*.*|| |
| 2078 | If you change the activation of this application, certain properties will be reset to their default values once the activation setting has been saved. |
| 2079 | A system application's identity cannot be changed. |
| 2080 | Server Application Files (*.MSI)|*.MSI|| |
| 2081 | Starting application(s)... |
| 2082 | Shutting down application(s)... |
| 2083 | A role assigned to a component, interface, or method did not exist in the application |
| 2084 | Importing components... |
| 2085 | Installing components... |
| 2086 | This application was set to run forever when the listener was enabled. You may wish to go to the advanced page and modify the shutdown time. |
| 2087 | If you save these changes and you have already exported this queued application you must export it again. Otherwise, clients will send unauthenticated messages which will get rejected by the QC listener. |
| 2088 | Object was not found in registry |
| 2089 | You may need to reinstall this component to restore the required registry settings. |
| 2090 | Either MSMQ is not installed or not running, or this application is not set to run as a queued application. |
| 2091 | Error %08X occurred. |
| 2092 | An unknown error occurred. You should check all documentation for a solution. If no further information is available, please contact technical support. |
| 2093 | Not specified (both assumed) |
| 2094 | Application Proxy Files (*.MSI)|*.MSI|| |
| 2095 | DTC error %08X occurred. |
| 2096 | A problem occurred while interacting with the DTC service. You should verify that DTC is started and working properly. |
| 2097 | One of the objects being updated does not exist |
| 2098 | This operation can not be performed on the system application |
| 2099 | Certain operations cannot be performed on the system application. Please refer to the documentation for more information. |
| 2100 | Due to the selected transaction support level, JIT Activation and synchronization are required. |
| 2101 | An object being inserted or updated does not belong to a valid parent collection |
| 2102 | Subscription ID |
| 2103 | &Subscription |
| 2104 | Data |
| 2105 | COM+ New Subscription Wizard |
| 2106 | This wizard will help you to create a new subscription. |
| 2107 | The wizard has gathered all necessary information to create the subscription. |
| 2108 | Select Event Class |
| 2109 | Select the event class that implements the method(s). |
| 2110 | Select Subscription Method(s). |
| 2111 | Select the subscription method or methods. |
| 2112 | Subscription Options |
| 2113 | Set the subscription properties. |
| 2114 | Another version of this application is already installed. Installation of this version cannot continue. To remove the existing version, use Add/Remove Programs on the Control Panel. |
| 2115 | One or more of the components in this application were imported. As a result, those components do not contain interface and method information. Exporting this application may create an application which is unusable on other machines. |
| 2116 | You must have enabled components in an application in order to start the application |
| 2117 | Access denied |
| 2118 | The publisher ID must be specified because both "use all interfaces" and "use all event classes" were chosen |
| 2119 | ThreadingModel value has changed |
| 2120 | The ThreadingModel value found in the registry has been modified outside of the COM+ environment. You will need to reinstall this component. |
| 2121 | Process Dump |
| 2122 | The dump of the selected process succeeded. The image was dumped to the default dump directory. |
| 2123 | &Partition |
| 2124 | Partition ID |
| 2125 | Pausing process(es)... |
| 2126 | Resuming process(es)... |
| 2127 | Copy the application '%s' from partition '%s' to the partition: |
| 2128 | Copy these %d applications to the partition: |
| 2130 | Please enter a service name. |
| 2131 | The service name entered has invalid characters. The '/' and '\' characters are not valid in service names. |
| 2132 | MMC could not enumerate existing services from the Service Control Manager. The service dependencies configuration list will not be available. |
| 2133 | This application has a dependency on a non-existent service. That dependency has been removed. |
| 2134 | A service already exists for this application. Configuring a new service will remove and replace the existing application service. Existing service settings will not be visible from this dialog. To change existing service settings use the Services MMC Snapin. Press OK to continue configuring a new service. |
| 2135 | Changing the transaction isolation level from 'Serialized' or 'Any' requires that all components called from this component have an isolation level less than or equal to the isolation level set for this component. |
| 2136 | Process ID |
| 2137 | Executable Name |
| 2138 | Paused |
| 2139 | The application %s cannot be stopped, because the following services depend on it, and are still running: |
| 2140 | Application ID |
| 2141 | Instance ID |
| 2142 | Type |
| 2143 | Set ID |
| 2144 | Default Partition |
| 2145 | Base Application Partition |
| 2146 | Information |
| 2147 | There are no local partitions available to add to the set. The Add Partition to Set dialog will now exit. |
| 2148 | One or more of the specified users already exist in another local partition set. |
| 2149 | The files could not be imported because they were compiled for different processor types |
| 2150 | The files could not be imported because they were compiled for an unsupported machine type |
| 2151 | The files could not be imported because they were compiled for a different processor type than the components already installed in the application |
| 2153 | {}-1234567890abcdefABCDEF |
| 2154 | The CLSID entered is invalid. |
| 2155 | The ProgID entered is invalid. A ProgID may not begin with a digit. |
| 2156 | The catalog server threw an exception and could not process the request. |
| 2158 | Read Uncommitted |
| 2159 | Read Committed |
| 2160 | Repeatable Read |
| 2161 | Serialized |
| 2162 | Name |
| 2163 | msCOM-ObjectID |
| 2164 | (ObjectClass=msCOM-Partition) |
| 2165 | All visible directory partitions are currently present on this system. |
| 2166 | Error |
| 2167 | The following error occurred attempting to browse partitions on the domain %1 |
| 2168 | User Browser |
| 2169 | Select user: |
| 2170 | The current user does not have the authority to browse partitions on the domain. To search as another user enter their username and password below. |
| 2171 | Please enter the username and password to be used when browsing domain partitions. |
| 2172 | No partitions are currently visible on the domain |
| 2173 | Description |
| 2175 | These COM components are registered to run as in-process servers. Select the components you want to import. |
| 2176 | These are the registered COM components. Select the components you want to import. |
| 2177 | &Legacy Component |
| 2178 | Legacy Component Import Wizard |
| 2179 | This wizard will help you import legacy components. |
| 2180 | Select users to assign default partition |
| 2181 | Promoting %s Legacy Components... |
| 2185 | &Configure My Computer Configure My Computer |
| 2186 | Copying component(s)... |
| 2187 | Copying application(s)... |
| 2188 | The specified Partition ID is already in use by '%1' Please use another Partition ID. |
| 2191 | Applications that run as services cannot use the interactive user identity. |
| 2192 | Library and Proxy applications do not have an identity. |
| 2194 | NULL |
| 2195 | The CLSID %1, item %2 and title %3 has the named value AppID, but is not recorded under \\HKEY_CLASSES_ROOT\AppId. Do you wish to record it? |
| 2196 | DCOM Configuration Warning! |
| 2197 | Duplicate ProgID's are not allowed within the same partition. Please assign a new ProgID for the copied component. |
| 2198 | Duplicate CLSID's are not allowed within the same partition. Please assign a new CLSID for the copied component. |
| 2199 | CopyOf. |
| 2200 | Error |
| 2201 | The COM+ explorer was unable to locate information required to perform the requested action. This may be caused by running out of system resources such as memory. |
| 2202 | |
| 2203 | The specified service name already exists. Please choose another name for the application service. |
| 2204 | Input out of range. Please enter a number between %1 and %2. |
| 2205 | Moving component(s)... |
| 2206 | The specified partition does not exist or you do not have permission to perform the requested action. Make sure that you are a member of a partition set that includes the partition you are trying to use. |
| 2207 | Please enter a number between %1 and %2 for the %3. |
| 2208 | Application Pool Size |
| 2209 | Maximum Concurrent Players |
| 2210 | Minimum Object Pool Size |
| 2211 | Maximum Object Pool Size |
| 2212 | Object Creation Timeout |
| 2213 | Transaction Timeout |
| 2214 | The "Run application as NT Service" option will not be available until this change is applied. |
| 2215 | Do you want to stop this service? |
| 2216 | Do you want to stop these services? |
| 2217 | The application %s cannot be stopped, because the following service depends on it, and is still running: |
| 2218 | The requested action cannot be performed because DTC is not running. |
| 2219 | Global |
| 2220 | Connection-oriented Netbios over TCP |
| 2221 | Connection-oriented Netbios over IPX |
| 2222 | Connection-oriented NetBEUI |
| 2223 | Connection-oriented TCP/IP |
| 2224 | Connection-oriented named pipes |
| 2225 | Connection-oriented SPX |
| 2226 | Connection-oriented DECnet transport |
| 2227 | AppleTalk DSP |
| 2228 | Connection-oriented Vines SPP transport |
| 2229 | Datagram UDP/IP |
| 2230 | Datagram IPX |
| 2231 | Windows Machine Name |
| 2232 | Four octet Internet address or DNS host name |
| 2233 | Internet Port Number |
| 2234 | Integer between 0 and 255. (0 - 32 reserved). |
| 2235 | Windows Server name (backslashes optional) |
| 2236 | Windows named pipe - start with "\\pipe" |
| 2237 | ... default system protocols ... |
| 2238 | Invalid endpoint format. Expecting %1. |
| 2239 | Integer between 0 and 65535 |
| 2240 | IPX Internet address or Windows server name |
| 2241 | DECnet area and node syntax |
| 2242 | DECnet phase IV object number |
| 2243 | Windows machine name optionally followed by @ AT zone |
| 2244 | AppleTalk endpoint string (max 22 chars) |
| 2245 | StreetTalk server (item@group@organization) |
| 2246 | Vines SPP port number (250 - 511) |
| 2247 | Tunneling TCP/IP |
| 2248 | Select the DCOM network protocol sequence that you want to add. Enter the endpoint details and click OK when you have finished. |
| 2249 | Select DCOM protocol and endpoint |
| 2250 | Modify the endpoint details if desired and click OK when you have finished. |
| 2251 | DCOM Endpoint Properties |
| 2252 | Duplicate protocol. |
| 2253 | The legacy components in this application can not be exported in COM+ 1.O format. |
| 2254 | Library applications have the recycling and pooling properties of their host process. |
| 2255 | Applications running as a service cannot be pooled or recycled. |
| 2256 | Memory Limit |
| 2257 | Call Limit |
| 2258 | Activation Limit |
| 2259 | Lifetime Limit |
| 2260 | Expiration Timeout |
| 2261 | Server |
| 2262 | Invalid port range format: Use a single number such as 4000 or a range in the form xxxx-yyyy such as 4000-4010. |
| 2263 | Default Access Permission |
| 2264 | Default Launch Permission |
| 2265 | Access Permission |
| 2266 | Launch and Activation Permission |
| 2267 | Change Configuration Permission |
| 2268 | Multi Select |
| 2269 | Shutting down process(s)... |
| 2271 | Recycling |
| 2272 | Activation cannot be forced in the caller's or the default context when access checks are enforced. |
| 2273 | The Partition GUID is not a valid GUID. Please enter a GUID in the following form: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} |
| 2274 | The set of protocols and endpoints available for use by clients of this DCOM server. The system defaults entry indicates that the default set of DCOM protocols and endpoints for the machine will be used. |
| 2275 | Transaction List |
| 2276 | Transaction Statistics |
| 2277 | The name of this application already exists in the service control manager database either as a service name or as another display name. Please choose another name. |
| 2278 | No partitions were found registered on the Domain. |
| 2279 | You must enable this application before attempting to start it. |
| 2280 | CLSID |
| 2281 | LocalServer32 |
| 2282 | Local Service |
| 2283 | Local Server |
| 2284 | Local Path: |
| 2286 | Administrator |
| 2287 | Browse for folder |
| 2288 | Installed |
| 2289 | Changes have been disabled for this partition. |
| 2290 | Changes have been disabled for this application. |
| 2291 | The Base Application Partition has been marked changes disabled. Partitions are not currently visible. Partitions can be made visible by selecting the "View Partitions" item in the view menu. |
| 2292 | The wizard has gathered all necessary information to import the component. WARNING Importing a component does not register interface and method information necessary for correct operation of interface- and method-level Role-based Security and QC features. If your component requires these features, use Component Install instead. |
| 2293 | The wizard has gathered all necessary information to import the component. NOTE Legacy components do not have access to COM+ services such as object context, transaction, synchronization, etc. |
| 2294 | Recycling Process(es) |
| 2295 | NT Service |
| 2298 | ...install new component(s) or event class(es). |
| 2299 | Install a Component |
| 2300 | An account for this domain and user could not be found. Check that the user has a valid user account in the specified domain. |
| 2301 | The current authentication level is not supported for library applications. The authentication level will be changed to "Default". |
| 2302 | _LocalServer32 |
| 2303 | LocalServer |
| 2304 | _LocalServer |
| 2305 | LocalService |
| 2306 | _LocalService |
| 2307 | Appid |
| 2308 | Copy Component(s) |
| 2309 | Components to copy: |
| 2310 | No applications were found that are valid destinations for the requested action. |
| 2311 | &Interactive user - the current logged on user |
| 2312 | &Local Service - Built-in service account. |
| 2313 | &Interactive User / Local Service - Server Applications will run as Interactive User, Services will run as Local Service. |
| 2314 | User %1 has already been assigned a default partition. |
| 2315 | Default Security |
| 2316 | Security |
| 2317 | Interfaces |
| 2318 | Application Manifest &File: |
| 2319 | Application Root &Directory: |
| 2320 | Browse for Manifest File |
| 2321 | Manifest Files (*.dll;*.exe;*.xml)|*.dll;*.exe;*.xml|| |
| 2322 | COM+ Partition Install Wizard |
| 2323 | This wizard will help you to install or create new partitions. |
| 2324 | The wizard has gathered all necessary information to perform the install. |
| 2325 | Install or Create a New Partition |
| 2326 | Please choose whether you want to install a previously exported partition or create an empty partition. |
| 2327 | Create Empty Partition |
| 2328 | Please specify the name of the new partition. |
| 2329 | Partition Installation Options |
| 2330 | Please specify the install directory. |
| 2331 | Select Partition Files |
| 2332 | Please specify the files that contain the partitions you want to install. |
| 2333 | Role |
| 2334 | Full Control |
| 2335 | Read |
| 2336 | Query Value |
| 2337 | Set Value |
| 2338 | Create Subkey |
| 2339 | Enumerate Subkeys |
| 2340 | Notify |
| 2341 | Create Link |
| 2342 | Delete |
| 2343 | Write DAC |
| 2344 | Write Owner |
| 2345 | Read Control |
| 2347 | Registry Value |
| 2348 | Partition Files (*.MSI)|*.MSI|| |
| 2349 | Partition Export Information |
| 2350 | Please enter information required to export this partition. |
| 2351 | COM+ Partition Export Wizard |
| 2352 | This wizard will help you export a partition. |
| 2353 | The partition has been successfully exported. |
| 2355 | Server applications cannot run under system service accounts. |
| 2356 | Interactive User |
| 2357 | Network Service |
| 2358 | Local Service |
| 2359 | Local System |
| 2385 | Applications that are configured to run as a service and interact with the desktop must run under Local System. |
| 2386 | Context properties are ignored when activation context is forced. |
| 2387 | Any Application |
| 2388 | QC Trusted User |
| 2389 | Reader |
| 2390 | Server Application |
| 2391 | Activator |
| 2392 | System Application |
| 2393 | COM+ Utilities |
| 2394 | COM+ Explorer |
| 2395 | COM+ QC Dead Letter Queue Listener |
| 2396 | COM+ partitions are currently disabled. |
| 2397 | N&etwork Service - Built-in service account with network access |
| 2398 | Please add application roles. |
| 2399 | Add Application Roles |
| 2400 | Please add users to roles. |
| 2401 | Add Users to Roles |
| 2402 | Roles |
| 2411 | Local Access |
| 2412 | Remote Access |
| 2413 | Local Launch |
| 2414 | Remote Launch |
| 2415 | Local Activation |
| 2416 | Remote Activation |
| 2417 | Security Limits |
| 2418 | Errors occurred while installing the following applications: %1 |
| 2450 | COM+ Event System |
| 2451 | Supports System Event Notification Service (SENS), which provides automatic distribution of events to subscribing Component Object Model (COM) components. If the service is stopped, SENS will close and will not be able to provide logon and logoff notifications. If this service is disabled, any services that explicitly depend on it will fail to start. |
| 2453 | The event class's security configuration does not allow monikers in per-user subscriptions. SubscriberMoniker: %1 |
| 2454 | The subscriber object is an event class |
| 2455 | The subscriber object has indicated that it does not support being subscribed to events |
| 2701 | &About DAC... |
| 2702 | Category |
| 2703 | Current |
| 2704 | Peak |
| 2705 | Average |
| 2706 | Status |
| 2707 | Unit of Work ID |
| 2708 | Isolation Level |
| 2709 | Severity |
| 2710 | Source |
| 2711 | Message |
| 2712 | Pause |
| 2713 | Continue |
| 2714 | Status: Unknown |
| 2715 | Status: Starting |
| 2716 | Status: Started %1 |
| 2717 | Status: Stopping |
| 2718 | Status: Stopped |
| 2719 | Status: Pausing |
| 2720 | Status: Paused |
| 2721 | Status: Error |
| 2722 | Mi&nimize |
| 2723 | &Restore |
| 2724 | MS DTC Admin Console |
| 2725 | Could not initialize the UI Client Component. Terminating |
| 2726 | DTC Admin Console - Not Connected |
| 2727 | DTC Admin Console - Connected |
| 2728 | Num. Open: |
| 2729 | Num. Committed: |
| 2730 | Num. Aborted: |
| 2731 | Num. In Doubt: |
| 2732 | Num. Heuristic: |
| 2733 | DTC Admin Console - Connecting |
| 2734 | Cl&ose |
| 2735 | &General |
| 2736 | &Transactions |
| 2737 | Trac&e |
| 2738 | &Statistics |
| 2739 | &Advanced |
| 2740 | MSDTC Service |
| 2741 | Windows 95 |
| 2743 | (active) |
| 2745 | (preparing) |
| 2747 | (prepared) |
| 2749 | (committing) |
| 2751 | (comitted) |
| 2753 | (aborting) |
| 2755 | (aborted) |
| 2757 | (in doubt) |
| 2759 | (heuristic commit) |
| 2761 | (heuristic abort) |
| 2763 | (heuristic danger) |
| 2765 | (heuristic damage) |
| 2767 | (forced commit) |
| 2768 | (forced abort) |
| 2769 | (committing) |
| 2770 | (only failed to notify) |
| 2773 | Parent / Subordinate |
| 2775 | &Reset |
| 2776 | (cannot notify commit) |
| 2777 | (cannot notify abort) |
| 2778 | <no parent> |
| 2780 | MSDTC |
| 2781 | Invalid log size. |
| 2782 | Please enter a log size of 1 MB or more. |
| 2783 | Uncommitted changes |
| 2784 | Changes to the configuration have not been applied. Continue without applying changes? |
| 2785 | Cannot set the default coordinator to be this computer. You have to re-install the MS DTC server to reset the default coordinator setup. |
| 2786 | Could not load the contact manager component needed to access registry functions. |
| 2787 | A default transaction coordinator already exists in your local registry. Replace existing entry ? |
| 2788 | The network computer you have selected does not have a transaction coordinator installed. Please try a different computer. |
| 2793 | TCP/IP |
| 2795 | NetBEUI |
| 2796 | at %1 - %2 |
| 2797 | Distributed Transaction Coordinator |
| 2798 | Coordinates transactions that span multiple resource managers, such as databases, message queues, and file systems. If this service is stopped, these transactions will fail. If this service is disabled, any services that explicitly depend on it will fail to start. |
| 2799 | Invalid log location. Please select a local fixed device for the location of the log. |
| 2800 | Invalid log location. The log file must be located on a shared cluster device. |
| 2801 | Invalid log size. The log file must be between 1Mb and MaxLogSize (Default = 512MB) in size. Please configure MaxLogSize to a larger value. |
| 2802 | Working... |
| 2803 | Select Computer |
| 2804 | Unable to load netapi32.dll |
| 2805 | Unable to load a system function from netapi32.dll |
| 2806 | Error opening the key for workgroup in the system registry. Please contact Microsoft product support (error: %d). |
| 2807 | Error reading the value for workgroup in the system registry. Please contact Microsoft product support (error: %d). |
| 2808 | Failed to copy the MS DTC log file to the shared disk. Please contact product support. |
| 2809 | An error occurred while trying to read information about any previous installations of MS DTC. Please contact product support. |
| 2810 | An error occurred while trying to read information about any previous cluster-aware installations of MS DTC. Please contact product support. |
| 2811 | Failed to get a list of the virtual servers in the cluster. Please contact product support. |
| 2812 | Failed to get a list of the shared disks in the cluster. Please contact product support. |
| 2813 | Setup found that the current configuration of the cluster does not contain any resource groups in which the MS DTC resource can be created. Setup of MS DTC requires that the cluster contain at least one resource group that contains both a network name resource and a shared disk resource. Setup also requires that this resource group be owned by the first node in the cluster on which setup is run. Please re-run setup after the appropriate changes to the cluster configuration have been made. |
| 2814 | Setup found that none of the network name resources are owned by this node and that this is the first time that setup was run on any node in the cluster. Setup of MS DTC requires that the cluster contain at least one resource group that contains both a network name resource and a shared disk resource. Setup also requires that this resource group be owned by the first node in the cluster on which setup is run. Please re-run setup after the appropriate changes to the cluster configuration have been made. |
| 2815 | Failed to create the MS DTC log file's directory. Please contact product support. |
| 2816 | Microsoft Distributed Transaction Coordinator Setup |
| 2817 | Failed to set the attributes on the MS DTC log file. Please contact product support. |
| 2818 | Failed to launch the MS DTC process. Please contact product support. |
| 2819 | Failed to install MS DTC on a master node in the cluster. Please contact product support. |
| 2820 | An unknown error occured while trying to install MS DTC. Please contact product support. |
| 2821 | Failed to install MS DTC on a secondary node in the cluster. Please contact product support. |
| 2822 | Failed to upgrade the MS DTC installation on the cluster. Please contact product support. |
| 2823 | Setup detected an incompatible version of MS DTC installed. Setup cannot continue installing MS DTC. |
| 2824 | Setup does not allow rolling upgrades of MS DTC. Setup is exiting. |
| 2825 | The first node on which MS DTC was installed is down. Please start that node and re-run setup. |
| 2826 | Failed to install MS DTC. Please contact product support. |
| 2827 | The MS DTC Setup completed sucessfully. |
| 2828 | Setup has sucessfully populated configuration information to allow MS DTC to run on this cluster node. Please run setup on all other nodes in the cluster before continuing. |
| 2829 | Setup failed because it was unable to completely remove all older versions of MS DTC. Please make sure that all applications using MS DTC are shut down and that the Control Panel window is closed. If this problem persists please contact product support. |
| 2830 | Setup determined that a newer version of MS DTC is installed, hence setup will exit without performing any changes. |
| 2831 | Setup failed because it was unable to install the performance counter extension for MS DTC. If this problem persists please contact product support. |
| 2832 | Failed to shutdown the MS DTC process. Please contact product support. |
| 2833 | Invalid log directory. The log location is not a valid directory name. |
| 2834 | Log directory does not exist. Do you wish to create a new directory? |
| 2835 | The MSDTC service will be stopped and restarted. All dependent services will be stopped. Applications using MSDTC may need to be restarted to use the new settings. Please press yes to proceed. |
| 2836 | The MSDTC service has been restarted |
| 2837 | Please enter a valid account |
| 2838 | There is a mismatch between the passwords, please try again |
| 2839 | Failed to update the security attributes. Please examine the eventlog for further details. |
| 2840 | Failed to stop the MS DTC service. Please examine the eventlog for further details. |
| 2841 | Failed to restart the MS DTC service. Please examine the eventlog for further details. |
| 2842 | MS DTC service is in an unknown or uncontrollable state. Please try to stop the MS DTC service and try again |
| 2843 | A remote host machine must be specified. |
| 2844 | The specified remote host machine does not exist. |
| 2845 | The MSDTC service and all the services that depend on MSDTC service will be stopped.Do you wish to proceed? |
| 2846 | An MS DTC log file already exists in the selected directory. Resetting an existing MS DTC log file may cause your databases and other transactional resource managers to become inconsistent. Please review the MS DTC Administrator's Manual before proceeding. Do you wish to reset the existing MS DTC log file? |
| 2847 | Out of memory. |
| 2848 | Could not initialize the MS DTC Admin Console General Page |
| 2849 | Could not locate the MS DTC configuration interface. |
| 2850 | The size of the MS DTC log is invalid. |
| 2851 | Could not find the MS DTC log disk device. Please select a new location for the MS DTC log file. |
| 2852 | Insufficient disk space for the MS DTC log file. |
| 2853 | Could not connect to the MS DTC statistics component. |
| 2854 | Could not connect to the MS DTC transaction list. |
| 2855 | Failed to get the DTC log path. Please contact product support. |
| 2856 | Failed to get the DTC service name. Please contact product support. |
| 2857 | Local DTC |
| 2858 | Clustered DTCs |
| 2859 | An error occured attempting to recover from a previous error. DTC may not work correctly. |
| 2860 | Logging |
| 2861 | An error occured changing the DTC account. Please try again. |
| 2862 | Security |
| 2863 | The specified remote host name is too long. |
| 2864 | Select the folder that will contain the DTC log file. |
| 2865 | Tracing |
| 2866 | The specified maximum buffer count is out of range. Valid values are between 1 to 999. |
| 2867 | An error occured processing the transaction list from MSDTC. The list may not be correct. |
| 2868 | Failed to get the security configuration for the remote host. |
| 2869 | The specified remote host does not allow remote administration. |
| 2870 | The specified remote host name is invalid. |
| 2871 | The log settings cannot be changed from this cluster node. Please open Component Services on the node that is currently hosting this MSDTC resource and try again. |
| 2946 | KtmRm for Distributed Transaction Coordinator |
| 2947 | Coordinates transactions between the Distributed Transaction Coordinator (MSDTC) and the Kernel Transaction Manager (KTM). If it is not needed, it is recommended that this service remain stopped. If it is needed, both MSDTC and KTM will start this service automatically. If this service is disabled, any MSDTC transaction interacting with a Kernel Resource Manager will fail and any services that explicitly depend on it will fail to start. |
| 2948 | DCOM Machine wide settings |
| 2949 | You are about to modify machine wide DCOM settings, this will effect all the applications on the machine, some applications may not work correctly as a result.Update DCOM settings? |
| 2950 | DTC MMC Snap-in |
| 2951 | DTC MMC Property-sheet extension |
| 3101 | Distributed Transaction Coordinator |
| 3102 | Microsoft Distributed Transaction Coordinator Resource |
| 3200 | Ignore |
| 3201 | Normal |
| 3202 | Severe |
| 3203 | Critical |
| 3204 | Manual |
| 3205 | Automatic |
| 3211 | Microsoft Corporation |
| 3400 | COM+ Network Access |
| 3401 | COM+ Network Access (DCOM-In) |
| 3402 | Inbound rule to allow DCOM traffic for COM+ Network Access. [TCP 135] |
| 3405 | COM+ Remote Administration |
| 3406 | COM+ Remote Administration (DCOM-In) |
| 3407 | Inbound rule to allow DCOM traffic to the COM+ System Application for remote administration. |
COM Classes/Interfaces
There is no type library in this file with COM classes/interfaces information
Exported Functions List
The following functions are exported by this dll:This dll doesn't export any function
Imported Functions List
The following functions are imported by this dll:No imported functions in this file.